VINCENT CD-S2 Manuel D'utilisation page 28

13
13. AUDIO OUTPUTS:
analogue audio signal outputs
One of the RCA connector pairs must be connected
to the relevant input of the amplifier, preamplifier
etc. It is not necessary to connect both outputs at the
same time or additionally use the digital output.
14. DIGITAL OUT COAXIAL
If the amplifier, receiver or preamplifier is equip-
ped with a digital coaxial digital input connector,
the relevant CD player signal output may be con-
nected to this. It is not necessary to connect an
analogue (13) and a digital signal output (14) at
the same time.
Vincent
28
REAR VIEW
14
15. FUSE: Fuse holder
This small plastic housing holds the fuse. Refer to
the security precautions.
16. AC: Power Connector
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet.
15
16