Preferences; Basic Operations - JVC EX-D5 Manuel D'instructions

Preferences

NOTE
The playback status mark has the same meaning of
the mark on the On-screen guide (page 15).
The initial settings of the system can be changed
according to the environment the system is used
in.
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
• The top and bottom of the preference
screen may not be displayed on a wide TV. Adjust
the picture size on the TV.

Basic operations

Press SET UP while the disc is
stopped or no disc is loaded
("NO DISC" is displayed).
• The following screen will be displayed on
the TV.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
• Proceed with operations by following the
description on the TV screen.
LANGUAGE
NOTE
• If the selected language is not recorded on the disc,
the optimum language set for the disc will be
displayed.
ENGLISH
ENGLISH
OFF
ENGLISH
• For a language code such as "AA", refer to the
"Language codes" (page 41).
Items Contents
MENU LANGUAGE Select the language for the DVD VIDEO menu.
AUDIO
Select the audio language for the DVD VIDEO.
LANGUAGE
SUBTITLE Select the subtitle language for the DVD VIDEO.
ON SCREEN Select the language displayed on the
LANGUAGE preference screens.
PICTURE
Items Contents (
MONITOR Select a display method suitable for your TV.
TYPE 16 : 9:
Select this when the aspect ratio of your wide
TV is fixed to 16:9 (when playing a DVD
VIDEO recorded at 4:3, the system
automatically adjusts the screen width of the
output signal).
4 : 3 LB (Letter Box)
Select this when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the black bars appear on the top and
bottom of the screen.
4 : 3 PS (Pan Scan):
Select this when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the left and right edges of the picture
will not be shown on the screen. (If the disc is
not compatible with Pan Scan, the picture will
be displayed at the Letter Box ratio.)
PICTURE Select an item suitable to the video source.
SOURCE AUTO :
The video source type (a video or film) is
automatically selected.
FILM:
Select this item when you want to view a film
or video recorded with the progressive scan
method.
VIDEO:
Select this item when you want to view a
normal video.
SCREEN Select the Screen Saver mode between
SAVER OFF (Screen Saver activates when there is no
operation made for about 5 minutes since a
still picture was last displayed).
FILE TYPE If there are both MP3/WMA and JPEG files on
a disc, you can select which files to play.
AUDIO :
Select this item when you want to play back
MP3/WMA files.
STILL PICTURE:
Select this item when you want to play back
JPEG files.
Advanced operations
: initial setting)
:
ON /
29