Moffat MAR04 Manuel Du Propriétaire Et Instructions D'installation page 9

Before you call for service...
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Refrigerator does not
operate
Vibration or rattling
(slight vibration
is normal)
Motor operates for
long periods or cycles
Refrigerator too warm
All manuals and user guides at all-guides.com
Possible Causes
Control in "0" position.
Refrigerator is unplugged.
The fuse is blown/circuit
breaker is tripped.
Front leveling legs (on some
models) need adjusting.
Refrigerator is on an
uneven surface.
Normal when refrigerator
is first plugged in.
Often occurs when large
amounts of food are
placed in refrigerator.
Door left open.
Hot weather or frequent
door openings.
Temperature control
set at the coldest setting.
Not enough clearance from
the wall.
Temperature control not
set cold enough.
Warm weather or frequent
door openings.
Door left open.
Cabinet sides are warm.
www.moffatappliances.ca
What To Do
• Move the control to a temperature setting.
• Push the plug completely into the outlet.
• Replace fuse or reset the breaker.
• See Leveling Legs.
• Use shims to level the refrigerator.
• Wait 24 hours for the refrigerator to completely
cool down.
• This is normal.
• Check to see if package is holding door open.
• This is normal.
•See About the control.
• Make sure there is enough air circulation around the
refrigerator.
• See About the control.
• Set the temperature control one step colder.
See About the control.
• Check to see if package is holding door open.
• This is normal for a hot wall type condenser.
9