Doro 515C Mode D'emploi page 10

All manuals and user guides at all-guides.com
Memory
The telephone has 4 one-touch memories and 10 two-touch memories for
frequently dialled telephone numbers.
When a number is stored in memory, you need only press one or two buttons
dependent on location to make a call. The one-touch memories are numbered
M1-M4, two-touch memories are stored using the telephone keypad digits 0-9.
Storing One-Touch Memories
1. Press .
P
2. Enter the phone number to be stored (up to 22 digits). Press
3. Enter name. Press the corresponding number key one or more times for the
first letter (see the table for the Phonebook). Press
4. Select memory location (M1-M4) by pressing the corresponding button.
Dialling using One-Touch Memories
1. Pick up the receiver and wait for a dialling tone.
2. Select the desired memory location (M1-M4) by pressing the corresponding button.
Storing speed dial memory locations
1. Press .
P
2. Enter the phone number to be stored (up to 22 digits). Press
3. Enter name. Press the corresponding number key one or more times for the
first letter (see the table for the Phonebook). Press
4. Select a memory location by pressing one of the keypad numbers
Dialling using speed dial memories
1. Pick up the receiver and wait for a dialling tone.
2. Press .
m
3. Select the number by pressing the relevant keypad number
Press if you want a pause in the telephone number.
r
If you need to change a number, store the new number in the same location as the old one.
English
Phonebook
EN 7
.
P
.
P
.
P
.
P
- .
0 9
- .
0 9