TERMA SIS Mode D'emploi page 18

All manuals and user guides at all-guides.com
8. The device should only be in-
stalled by a qualified installer
in accordance with the applica-
ble regulations regarding safe-
ty and all other regulations.
9. All installations to which the
device is connected should
comply with regulations appli-
cable in the country of installa-
tion and use.
10. Extension leads or electric plug
adapters should not be used in
order to supply power to the
heater.
11. The electric installation to
which the heater is perma-
nently connected must have
the right current differential
and overcurrent relay (R.C.D.)
of 30 mA.
An Omni-pole cut-out is re-
quired for disconnecting the
device on all poles, via joints
positioned at least 3 mm
apart.
12. The device equipped with
a supplying cable without plug
can be installed in bathrooms
in zone 1, as defined by appli-
cable law, subject to any addi-
tional regulations concerning
18