Ipod Operation - Mstation 2.1 Stereo Orb Guide De L'utilisateur


All manuals and user guides at all-guides.com

iPod Operation

To operate your mStation Orb™ with an iPod connected to the docking port, follow
the steps outlined below:
1. Press the Standby/On button on the mStation Orb™ or the Remote Control. The
Status Indicator light will turn blue.
2. If it isn't already, turn on your iPod by pressing the Play/Pause button on the mStation
Orb™ or the Remote Control.
3. Navigate to the desired playlist or song using your iPod's controls.
4. Press the Play/Pause button on the mStation Orb™ or the Remote Control to begin
listening to the selected song.
5. Use the Volume Control buttons on the mStation Orb™ or Remote Control to set the
desired listening level. Use the Control Buttons on the mStation Orb™ or Remote
Control to move through the selected playlist.
6. When you are finished listening, press and hold the Play/Pause on the mStation
Orb™ or the Remote Control. Your iPod will turn off. The Status indicator light will
turn red.
7. Press the Standby/On button on the mStation Orb™ or Remote to return the mStation
Orb™ to Standby mode. The Status indicator light will turn amber.
All of your iPod' s control buttons remain active while docked to the mStation Orb™.
Navigation of your music library can only be performed using the iPod' s controls.
When the iPod is turned off and left in the docking port, the iPod will continue to
charge as long as the mStation Orb™ is plugged into an AC source. Your iPod will continue
to operate even when you remove it from the docking port. Returning the iPod to the mSta-
tion Orb™ docking port will resume play as long as the mStation is not in Standby mode.
iPod + iTunes Operation
Plugging your Mac or PC into the mStation Orb's™ USB or FireWire jack provides your
iPod access to your computer and iTunes music library without disconnecting it from
the docking port. To download or make changes to the music on your iPod, follow the
instructions that came with your iPod.
Whenever you plug your computer into the mStation Orb' s ™ USB or FireWire
jack while an iPod is connected to the docking port, the computer will auto-
matically detect the iPod and, depending on your settings, launch iTunes.
Remember, newer generation iPods do not support FireWire connections. For more in-
formation, see the instructions that came with your iPod.
While linking to the computer, music playback, as well as access to your iPod, will be
interrupted briefly. Playback will resume once the computer has successfully linked with
your iPod. Your iPod' s screen will display the message "Do Not Disconnect. "
When you are finished accessing your iPod, follow the instructions that came with your
iPod to eject (disconnect) it from the computer.
!
While connected to your computer, if you see a message on your iPod that says
"Do not disconnect, " it is not safe to remove the iPod from the docking port or
unplug the computer from the USB or FireWire jack. To avoid damage to your files,
follow the instructions that came with your iPod to properly eject (disconnect) the iPod
before undocking or disconnecting the USB or FireWire cable from the mStation Orb™.
Once you have successfully ejected (disconnected) the iPod, you can safely unplug the
computer or undock the iPod from the mStation Orb™.
To continue listening to your iPod, make sure it is connected to the mStation Orb™
properly and follow the steps outlined in "iPod Operation."