Mstation 2.1 Stereo Orb Guide De L'utilisateur page 9

All manuals and user guides at all-guides.com
Audio Device Operation
To operate your mStation Orb™ with an audio device connected to the Line In jack,
such as an iPod without a dock connector, portable MP3 or CD player, computer, etc.,
follow the steps outlined below:
1. Press the Standby/On button on the mStation Orb™ or the Remote Control. The
Status Indicator light will turn blue.
2. Turn on the connected audio source and operate it using the device's own controls.
3. Use the Volume Control buttons on the mStation Orb™ or Remote Control to set the
desired listening level. If the audio device has its own volume control you might need
to adjust it as well.
When listening to a device connected to the Line In jack, only the Standby/On,
Volume, Bass and Treble control buttons on the mStation Orb™ and Remote
Control will function. If your audio device has its own volume control, you may
need to adjust it, together with the mStation Orb' s ™ own volume controls, to prevent
distortion during playback. Control of the audio device is performed using the device' s
own controls.
4. When you are finished listening, stop the audio device and turn it off using its own
controls.
5. Press the Standby/On button on the mStation Orb™ or Remote to return it to Standby
mode. The Status indicator light will turn amber.
An iPod connected to the mStation Orb™ using the Line In jack cannot be
controlled by either the mStation' s ™ control buttons, or by a computer con-
nected to the mStation Orb' s ™ USB or FireWire jack.
Remember, when a device is connected to the Line In jack of the mStation Orb™, playback
from other devices connected to the docking port or USB or FireWire jack is disabled. To
enable playback of these devices, you will need to disconnect the mini plug cable from
the mStation Orb™.