Ipod Operation - Mstation 2.1 Stereo Tower Guide De L'utilisateur


All manuals and user guides at all-guides.com

iPod Operation

To operate your mStation Tower™ with an iPod connected to the docking port, follow
the steps outlined below:
1. Press the Standby/On button on the mStation Tower™ or the Remote Control. The
Status Indicator light will turn blue.
2. If it isn't already, turn on your iPod by pressing the Play/Pause button on the mStation
Tower™ or the Remote Control.
3. Navigate to the desired playlist or song using your iPod's controls.
4. Press the Play/Pause button on the mStation Tower™ or the Remote Control to begin
listening to the selected song.
5. Use the Volume Control buttons on the mStation Tower™ or Remote Control to
set the desired listening level. Use the Control Buttons on the mStation Tower™ or
Remote Control to move through the selected playlist.
6. When you are finished listening, press and hold the Play/Pause on the mStation
Tower™ or the Remote Control. Your iPod will turn off. The Status indicator light will
turn red.
7. Press the Standby/On button on the mStation Tower™ or Remote to return it to
Standby mode. The Status indicator light will turn amber.
All of your iPod' s control buttons remain active while it is docked to the mStation
Tower™. Navigation of your music library can only be performed using the iPod' s
controls. When the iPod is turned off and left in the docking port, the iPod will
continue to charge as long as the Main Power switch at the bottom of the mStation
Tower™ is ON. Your iPod will continue to operate even when you remove it from the
docking port. Returning the iPod to the docking port will resume play as long as the
mStation Tower™ is not in Standby mode.
iPod + iTunes Operation
Plugging your Mac or PC into the USB jack of the mStation Tower™ provides your iPod
access to your computer and iTunes music library without disconnecting it from the
docking port. To download or make changes to the music on your iPod, follow the
instructions that came with the iPod.
Whenever you plug your computer into the mStation Tower' s ™ USB jack while
an iPod is connected to the docking port, the computer will automatically
detect the iPod and, depending on your settings, launch iTunes. For more infor-
mation, see the instructions that came with your iPod.
While linking to the computer, music playback, as well as access to your iPod, will be
interrupted briefly. Playback will resume once the computer has successfully linked with
your iPod. Your iPod' s screen will display the message "Do Not Disconnect. "
When you are finished accessing your iPod, follow the instructions that came with your
iPod to eject (disconnect) it from the computer.
!
While connected to your computer, if you see a message on your iPod that says
"Do not disconnect, " it is not safe to remove the iPod from the docking port or
unplug the computer from the USB jack. To avoid damage to your files, follow
the instructions that came with your iPod to properly eject (disconnect) the iPod before
undocking or disconnecting the USB cable from the mStation Tower™.
Once you have successfully ejected (disconnected) the iPod, you can safely unplug the
computer or undock the iPod from the mStation Tower™.
To continue listening to your iPod, make sure it is connected to the mStation Tower™
properly and follow the steps outlined in "iPod Operation."