Ametek mocon Dansensor MAP Mix ProVectus Guide Utilisateur page 44

42 Guide utilisateur
Location Register read
0xA035
0xA04B
0xA009
0xA01F
Write commands (W (Operational commands))
Location Register write Encoding
0x0000
0x0010
P/N 300864-H
01/2020
Encoding
"Mixer table 1" Not used in MMP
offset
(read only)
"Mixer table 2" Not used in MMP
offset
(read only)
Mixer table 1 Not used in MMP
(read only)
Mixer table 2 Not used in MMP
(read only)
Mix 1 setting 1 unsigned byte
Range 0 to 100%
For a 3-gas mixer this controls the setting of "GAS 2 INPUT"
i.e. %CO
For a 3-gas mixer:
When writing new "Mix 1 setting" MAP mix 8000 will not
change "Mix 2 setting", and vice versa, if possible.
i.e. %O
change in the new "Mix 1 setting" or "Mix 2 setting" setting.
If/when %O
new "Mix 1 setting", "Mix 2 setting"( %N
versa.
The sum of %N
FR Dansensor
2
is increased/decreased to compensate for the
2
reach minimum % or 100%, when adjusting to a
2
, %CO and %O
2 2 2
MAP Mix Provectus
®
) is changed and vice
2
is always 100