Product Description; Equipment - PAW DN 25 Notice De Montage Et D'utilisation

3 Product description

3 Product description
The fitting allows to easily mount the heat flowmeter into the return of mixed heating circuits.
The fitting can be used for all heat flowmeters with the connecting dimensions ¾" x 110 mm
and 1" x 130 mm (DN 25) or 1" x 130 mm (DN 25).
The scope of delivery includes the required flat-sealing adapter pieces, an adapter pipe,
a non-return valve for the return of the mixing valve, 2 different reducers to mount the
flow sensor in the thermometer ball valve as well as gaskets.
The adapter pieces for heat flowmeters with other connecting dimensions must be obtained
by the customer.
3.1

Equipment

2018/02
A-1 Flow to the consumer circuit
A-2 Full metal thermometer with immersion
sleeve, integrated in the ball valve (flow)
B Heating pump
C 3-way bypass mixing valve
C-1 Flow from the heat generator
C-2 Return to the heat generator
Adapter pipe for heat flowmeter
D
with adapter pieces,
heat flowmeter required onsite
E Design insulation with optimised function
F-2 Full metal thermometer with immersion
sleeve, integrated in the ball valve (return)
F-1 Return from the consumer circuit
993x463-mub-ml – V01 B-5