Pur Line FRESH AIR 200 Manuel D'utilisation page 10

PARTS
OPERATION
Ionizer indicator
Light intensity
sensor
Filter replacement
indicator
Switch button
Operation mode
indicator
Air Inlet
OPERATION
TAKE OUT THE FILTER
Before first use, take out/install filter.
1. Pull out the filter cover.
2. Unlock the filter.
3. Remove the filters from the packaging materials.
4. Install the filters into the air purifier and make the
pull clips towards you.
5. Lock the filter: turn the locking button to the left
and fix it in the appliance.
6. Install filter cover.
In order to allow the best performance of the purifier,
keep it to a proper distance away from the wall and
other objects when it is in use:
- At least 120 cm from ceiling
- At least 30cm form wall or other objects
EN
Air quality
indicator
Sensor cover
Remote
Ionizer button
connection
Handle
Air inlet
Power cord, manual and
remote control inside
1
3
4
8
2
5
6
Handle
Plug in