Télécharger Imprimer la page

Samsung LEVEL U EO-BG920 Mode D'emploi page 542

Publicité

Connecting via Bluetooth
Connecting additional devices
The headset can connect to up to two Bluetooth-enabled devices at the same time. When
you connect the headset to two devices, the last device you connect is recognized as the
primary device. The other device is recognized as the secondary device.
1
Connect the headset to a device via Bluetooth.
2
Press and hold the Multifunction button for three seconds to re-enter Bluetooth pairing
mode.
The first device will be disconnected.
3
Connect the headset to a second device.
4
Reconnect the headset to the first device.
This feature may not be supported on some devices.
Reconnecting or disconnecting the devices
Reconnecting the devices
When your headset is disconnected from the device due to the distance between the devices,
bring the devices closer together to pair them again.
If the connection is lost due to a problem with the connected device, press the Multifunction
button on the headset. You can also access the Bluetooth menu on the connected device to
pair them again.
Disconnecting the devices
Press and hold the Multifunction button for three seconds. Then, the connection ends and
the headset enters Bluetooth pairing mode.
You can also end the connection by turning off the headset. When you turn on the headset
again and the devices are in range, the headset automatically connects with the most
recently paired device.
English (USA)
11
9

Publicité

loading