Figure 3.16: Oscar Interface User Status Dialog Box; Figure 3.17: Oscar Interface Disconnect Dialog Box - Avocent AutoView 3100 Mode D'emploi

All manuals and user guides at all-guides.com
33
Chapter 3: Local Port Operation

Figure 3.16: OSCAR Interface User Status Dialog Box

To disconnect a user:
1. If the OSCAR interface is not open, press to open the Main dialog box.
Print Screen
2. Click Commands - User Status to open the User Status dialog box shown in Figure 3.16.
3. Click the letter corresponding to the user to disconnect. The Disconnect dialog box will appear as
shown in Figure 3.17.

Figure 3.17: OSCAR Interface Disconnect Dialog Box