Sylvania SDVD1010 Mode D'emploi page 13

MAIN UNIT:
1. Recharge or connect the unit to AC/DC Adaptor/ Car Adaptor as previous procedure.
2. Press the OPEN button on main unit to open the CD door.
3. Insert the disc to the center spindle with label side face up and close the lid.
4. Power on the unit by sliding the POWER ON/OFF switch on the unit to the ON position.
The green indicator will turn on and the unit will start playback automatically.
5. For private listening, insert headphones into the phone jack.The external speakers will
disconnect automatically.
6. To power off, slide the POWER ON/OFF switch to the OFF position.
SECONDARY UNIT:
1. Connect the secondary unit to the main unit by the supplied DC and AV connection
cables as previous procedures.
2. Slide the POWER ON/OFF switch to the ON position to power on the secondary unit.
3. Press the DISPLAY SETUP button to enter the display setting menu.
Press the DISPLAY ON/OFF
VOL +/-
Press
MUTE
Press
MUTE
Press
MUTE
Press
Press the DISPLAY SETUP button to confirm.
VOL +/-
Press
Press the DISPLAY SETUP button to confirm.
VOL +/-
Press
Press the DISPLAY SETUP button to confirm.
VOL +/-
Press
Press the DISPLAY SETUP button to confirm.
VOL +/-
Press
4. For private listening, insert the headphones into the phone jack.The speakers will
disconnect automatically.
5. To
power off, slide the POWER ON/OFF switch to OFF position.
All manuals and user guides at all-guides.com
Operation
or MUTE
button to set the picture brightness.
button to skip to next item, press
button to skip to next item, press
button to skip to next item, press
button to set the volume.
button to set the aspect ratio to 4:3 or 16:9.
button to set the TV Type to AUTO, PAL, NTSC or SECAM.
button to reset for reset setting and exit.
button to cursor up and down.
VOL +/-
button to set picture contrast.
VOL +/-
button to set picture color.
VOL +/-
button to set the language.
13