Power Source - Sylvania SDVD1010 Mode D'emploi

unit has a built-in Lithium-ion rechargeable battery. Recharge it as follows:
The main
Charging by supplied AC/DC adapter:
1. Connect the plug from the supplied AC/DC adapter to the DC IN Jack on the main
unit.
2. Connect the AC/DC adapter to the wall outlet having AC 100-240V~; 50/60Hz.
Notes:
• The AC/DC adapter is intended to be correctly oriented in a vertical or floor mount
position.
• Your battery will last longer if you follow these simple guidelines for caring for and
storing it.
• Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F).
• Do not overcharge (longer than 24 hours). Excessive charging or discharging may
shorten the battery's life.
• Battery life naturally shortens slowly over time.
Charging by the supplied Car Adapter:
1. Connect to the cigarette lighter socket of a vehicle that has a 12V battery as the figure
below. It is NOT compatible with a vehicle that has a 24V battery.
2. This is a special negative grounded car adapter. Using this car adapter with a positive
grounded car can cause a malfunction.
3. Do NOT plug in the car adapter until the car ignition is turned on.
4. Disconnect the car adapter from the cigarette lighter and the unit after use.
To DC IN Jack on the main unit
All manuals and user guides at all-guides.com

Power Source

11
To the cigarette
lighter socket