Do Not Use Silk'n Silhouette; Get Started - Silk-n Silhouette Mode D'emploi

5. Do not use Silk'n Silhouette™:
With attachments or accessories are not recommended by InnoEssentials
If it has a damaged cord or plug.
If you see or smell smoke when it is in use.
If it is not working properly or if it appears damaged.
If its THERMAL SENSOR is cracked, or broken.
If the outer shell is cracked or is coming apart.
Please contact Silk'n Customer Service

6. Get Started!

1. Remove Silk'n Silhouette™ DEVICE and other components from box.
2. Plug the AC/DC ADAPTOR cord into the Silk'n Silhouette™ socket.
3. Plug the AC/DC ADAPTOR into an electrical outlet. All three indicator lights will turn on and off repeatedly
one after the other.
4. The device is now in STBY mode and is ready to start.
Treat with Silk'n Silhouette safely and properly!
5. Spread a thin layer of Slider gel on the designated treatment area.
Alternatively, spread a moderate amount of Slider Gel on the device' s TREATMENT SURFACE. The Slider
gel is designed to better conduct the energy into your skin, for optimal results.
6. Press the TREATMENT MODE SELECTION BUTTON. TREATMENT MODE 1 INDICATOR LIGHT will
turn on.
7. Attach the TREATMENT SURFACE to the skin. Please note that the skin must be clean and dry before
treatment, free of moisturizers and lotions.
5