Télécharger Imprimer la page

Chicago Pneumatic BRK 25 Prescriptions De Sécurité Et Instructions Pour L'opérateur page 19

Brise-béton hydrauliques portatifs

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
BRK 25, 40, 55, 70, 95
Every 600 hours of
operation or every year
Check moving parts, seals and bolts for wear and
cracks. Replace if necessary.
Check the function of the machine.
Storage
Disconnect the machine s hoses from the power
source, see "Start and stop".
Make sure that the machine is properly cleaned
before storage.
In case of long-term storage, the striking piston
must be protected against corrosion. This is done
by pushing it (through the bushing) to its upper
position while the machine is placed
up-side-down. As the quick-release couplings are
blocked when disconnected, the striking piston
must be pushed upwards with the hoses mounted
but the power pack inactivated.
Store the machine in a dry place.
Disposal
A used machine must be treated and scrapped in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible.
Before a used machine is scrapped it must be
emptied and cleaned from all hydraulic oil. The
remaining hydraulic oil must be deposited and any
negative influence on the environment is to be kept
as low as possible.
3392 5166 90 | Original instructions
Safety and operating instructions
19

Publicité

loading

Ce manuel est également adapté pour:

Brk 40Brk 55Brk 70Brk 95