Anglecare BABYFOON AC420 Mode D'emploi page 67

Masquer les pouces Voir aussi pour BABYFOON AC420:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF the Out-of-
Range Alarm will sound. Turn the Nursery Unit ON again to reactivate the function.
TO STOP THE OUT-OF-RANGE ALARM:
Turn the Parent
Unit OFF
4.2 - SOUND TRANSMISSION (VOX)
Your Angelcare
monitor is equipped with a voice-activated system. The Nursery Unit
®
will be activated and transmit sounds to the Parent Unit only when it captures sounds.
The sensitivity dial allows controlling the level of sound picked up and transmitted by the
Nursery Unit.
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling), keep
both units at least 3 meters apart.
All manuals and user guides at all-guides.com
OR
IF YOU HEAR NO SOUND:
• Check that both units are switched on.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
Turn the Nursery
Unit ON
E
N
67

Publicité

Table des Matières
loading

Table des Matières