Publicité
Les langues disponibles
Les langues disponibles
HU 0620
PNEUMATIC OIL DISTRIBUTOR 24L
INTRODUCTION
The 24l pneumatic oil distributor (HU0620) allows the transfer of oil without the need for a
continuous air connection. Easy to use, it works even at low air pressure. The safety valve on
the tank provides protection against high air pressures.
The amount of oil used can be checked from the tank scale. It is equipped with two fi xed and
two swivel castors for high mobility.
A fi lter funnel is available for oil fi lling. It is also recommended to always leave 4/5 of the tank
fi lled with oil.
Model
HU 0620
Pneumatic
SAFETY RULES - WARNINGS
• Wear safety equipment before using this product.
• The ground around the machine can be slippery, so it is important to be careful not to slip
when working with this machine.
• Never spray the liquid on a living object.
• Do not weld near the tank.
• Do not disassemble machine parts without the agreement of the supplier or an authorized
department.
• Use only original spare parts. Never use any other optional spare parts.
• In the event of non-compliance with the above-mentioned points, CLAS cannot be held
liable.
0,5 Bar
0,5 Bar
Flow Rate
24L
2mx12x18mm
39x42x92
15
Publicité
