Hkoenig legi25 Manuel D'instructions page 7

appliance as well as before each cleaning and when
you are not using the appliance.
• Always stay close to the device and attentive while
it is in use. Do not leave it unattended.
• Never pour any cold liquid into the tank when it is
hot.
• Never heat the sterilizer if it is empty. If this should
happen, allow the appliance to cool down before
use to avoid any risk of burns during filling.
• The boiling point of water varies depending on the
altitude, atmospheric pressure, the accuracy of the
thermostat, etc. In order to accurately determine the
boiling point of your appliance, please do the
following :
1. Turn the thermostat and timer to full.
2. Wait for the boil.
3. Lower the thermostat until the indicator light goes
out.
4. Set your timer.
5. Self-regulation is then in operation according to
the boiling point, you can let your sterilizer run for
the expected time.