To unplug or move the appliance, remove the cord
plug from the wall outlet without forcing it. Connect
the cord plug securely to the wall outlet to turn on
the power.
• This appliance may be used by persons with
reduced physical, sensory or mental capabilities or
lack of experience or knowledge, provided that they
are supervised or instructed in the safe use of the
appliance and that they fully understand the
potential hazards.
• Do not use a damaged cable or plug to connect
the appliance. If the cord or plug is damaged, have
it repaired by a professional. Contact your after-
sales service.
• To avoid any risk of electric shock, do not immerse
the power cord and / or its plug-in in any liquid.
• Check that the voltage of the device corresponds
to your installation (the device operates on 220-240
volts).
• Do not use defective equipment.
• Stop all use of the device if it seems damaged.
• If the device is dropped or accidentally submerged
in water, unplug the device first. Do not attempt to
take it out if it is still plugged into the electrocution
pin. Stop using the device.