Moulinex ULTRABLEND LM935E10 Mode D'emploi page 5

AFTER USING YOUR APPLIANCE
• Press on the power button and unplug the appliance.
• Empty the preparation, the jug is not meant for storing food in the refrigerator or freezer.
• To clean the motor unit, use a damp cloth. Dry it carefully.
• Never immerse the motor unit in water.
• For easy cleaning, wash the removable parts in water with few drops of washing-up liquid,
immediately after use.
• The jug, lid and measuring cap can be cleaned in the dishwasher, but the gasket must not go
in the dishwasher.
• Frequent cleaning in a dishwasher risks damaging the surface of the jug.
• For easy cleaning, you can use the "Clean program" :
Put 150ml of water and 1 drop washing up liquid in the jug. The blender works at various
alternating speeds for approx. 1 min 30.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Appliance does not work
The appliance stopped while
in use
Excessive vibrations
Causes
The plug is not connected.
The blender jug is not
positioned correctly on the
motor unit.
The power switch is on OFF
position.
In case of software bug.
Overload
The silicon gasket is missing
or not correctly positioned.
The product is not placed on
a flat surface.
Volume of ingredients is
too high.
The silicon gasket is missing
or not correctly positioned.
Solutions
Connect the appliance to a
socket with the same voltage
as indicated on the rating
plate of the appliance.
Check that the blender jug is
positioned properly on the
motor unit as explained in
the instructions.
Follow the instructions for
starting your appliance.
Unplug the appliance, wait
few minutes and plug in
again.
Follow the instructions in
section Overload.
Place the silicone gasket
correctly on the motor unit.
Place the appliance on a flat
surface.
Reduce the quantity of
ingredients processed.
Place the silicone gasket
correctly on the motor unit.
EN
3