Samsung DVD-FP580 Mode D'emploi page 58

All manuals and user guides at all-guides.com
R
E F E R E N C E
Troubleshooting
Before requesting service, please check the following.
Problem
• Check the batteries in the remote control.
No operations can be
They may need replacing.
performed with the
• Operate the remote control at a distance of no more than 20 feet.
remote control.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• 5.1 channel sound is reproduced only when the following conditions are met :
5.1 channel sound is
not being reproduced. 1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "5.1 ch" mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
• The features or action cannot be completed at this time because:
The icon appears
1. The DVD's software restricts it.
on screen.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of range.
Disc Menu doesn't appear.
• Check if the disc has a Menu.
Play mode differs from • Some of the functions selected in the Setup Menu may not work properly if the
the Setup Menu
disc is not encoded with the corresponding function.
selection.
The screen ratio
• The Screen Ratio is fixed on your DVDs.
cannot be changed.
• Make sure you have selected the correct Digital Output in the Audio Options
No audio.
Menu.
The screen is blocked
• Press the
inside. All settings will revert to the factory settings.
• Press the
Forgot password
inside. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
If you experience other
• Go to the contents and find the section of the instruction book that contains
problems.
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
• Make sure that the disc is not dirty or scratched.
The picture is noisy or
distorted
• Clean the disc.
Action
button (on the front panel) for more than 5 seconds with no disc
button (on the panel) for more than 5 seconds with no disc
ENG-58
Page
P5
P8
P18
P48~49
P42~56
P50~52
P48~49
P19
P53
P4