Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
S
Rear Panel (DVD-F1080)
1.
DIGITAL AUDIO OUT JACKS
-
Use coaxial digital cable to connect to a compatible
Dolby Digital receiver.
- Use coaxial digital cable to connect to an A/V Amplifier
that contains a Dolby Digital, MPEG2 or DTS decoder.
2.
COMPONENT VIDEO OUT JACKS
-
Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
- If P-SCAN is set to "ON" in Video Output of the Setup
Menu, progressive scan mode will work.
- If I-SCAN is set to "ON" in Video Output of the Setup
Menu, interlaced scan mode will work.
3.
AUDIO OUT JACKS
-
Use audio cables to connect to the Audio input jacks of
your television or audio/video receiver.
Note
-
Consult your
TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- The HDMI output of this unit can be connected to a DVI jack on a
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input
(DVD-F1080 only).
- Refer to the
TV's instruction manual for detailed information regarding the TV's HDMI input jack (DVD-
F1080 only).
- See pages 50 ~ 52 to get more information on how to use the setup menu.
E T U P
, P
and Y video.
R
B
ENG-10
4.
VIDEO OUT JACK
-
Use a video cable to connect to the Video input jack on
your television.
5.
AC IN JACK
-
Use AC IN cable(Included) to connect this jack into the
power outlet.
6.
HDMI OUT JACK
-
Use an HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically from the player
about 10 seconds later.
TV or other device using a conversion
Publicité
Table des Matières
