Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
C
O N N E C T I O N S
Connecting to an
Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT
jacks on the rear of the DVD player to the AUDIO (red
and white) IN
jacks of the
Amplifier.
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT or HDMI OUT jacks on the rear of the DVD
player to the
VIDEO, COMPONENT or HDMI-DVI IN jacl of
your TV as described on pages 12 to 16.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the
input
in order to hear sound from your DVD
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
-
Please set the audio in the menu screen according to the Amplifier.(See pages 48 to 49)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Amplifier to select
external
player..
ENG-17
RED
WHITE
Audio Cable
WHITE
RED
2-Channel stereo amp
Publicité
Table des Matières
