KitchenAid Pro Line Serie Mode D'emploi page 19

Masquer les pouces Voir aussi pour Pro Line Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If message tones are enabled, the coffee maker will beep
once when the water reservoir is near full.
3.
After filling the reservoir, place the carafe on the coffee maker
warming plate.
4.
Grasp the brew basket handle and remove the brew basket
from the front of the coffee maker.
5.
Make certain the plastic brew basket insert is placed in the brew
basket. Insert a 10–12 cup flat-bottom paper filter or the
optional gold-plated permanent filter into the brew basket. Using
the included scoop, fill the filter with one rounded scoop of
ground coffee for each cup desired. Add more coffee for a
stronger brew, less for a weaker brew. Use a medium grind
appropriate for automatic drip coffee makers: too fine a grind
will produce bitterness and may cause water to overflow the
brew basket.
6.
Slide the brew basket into the coffee maker as far as possible.
7.
To begin brewing, turn the Auto-On/Off Switch clockwise to
the "On/Off" position, then release. The on/off indicator light
will illuminate when the coffee maker is on. Do not remove the
carafe from the coffee maker until brewing is complete.
Continued...
17

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Pro line 4kpcm100

Table des Matières