Bestway HYDRIUM Serie Manuel De L'utilisateur page 10

Repair
In the event of a leak, patch your pool using the underwater adhesive
repair patch provided. You can find the instructions in FAQs on the
support section of our website, www.bestwaycorp.com.
Storage
1. Please remove all the accessories and spare parts of the pool and
store them clean and dry.
2. Store liner and accessories in a dry place with a moderate
temperature between 5ºC / 41ºF and 38ºC / 100ºF.
3. During the rainy season, pool and accessories should be stored as
per above instructions also.
4. Improper draining of the pool might cause serious personal injury
and/or damage to personal property.
5. We strongly recommend the pool is disassembled during the off
season (winter months). Store in a dry location out of children's
reach.
If you do not want to dismantle the pool in winter, please observe the
following instructions:
IMPORTANT:
Do not drain all of the pool water. If you do
so, the pool may be damaged by strong wind. Drain the water to 10 cm
below the inlet valve on the pool wall.
1. Drain the water to 10cm below the inlet valve on the pool wall. You
can use a pump or a garden hose (Diagram 19, 20).
2. Treat the pool water with a suitable chemical product.
3. Remove the filtration system from the pool. You can leave the
inlets/outlets attached to the pool.
4. Also remove any other pool accessories and store them in a dry and
cool place.
5. Protect the pool with the pool cover.
If you want to dismantle the pool in winter, please observe the
following instructions:
1. Drain the pool with a garden hose, or use a drain pump to empty the
pool (Diagram 19).
2. Clean every pool parts with a sponge and a soap with a neutral pH.
Dry them and tidy them away in a dry and clean place.
19
20
4 in. (10 cm)
RE- ASSEMBLY
Carefully inspect your pool to ensure that there are no missing or
damaged parts.
1. Follow steps 1 through 8 for assembling the rail and steel wall.
2. Align the holes on both the steel wall and the liner.
3. Assemble the control valve and strainer.
#04
#08
4. Follow steps 9 through 13 and fill the pool with water.
NOTE:
If you discover the liner is damaged, please contact our
After Sales Service or purchase a new liner.
10