HoMedics MCS-750H-CA Mode D'emploi page 9

All manuals and user guides at all-guides.com
Massage Cushion
Power Button
To turn on the Massage functions, first press the POWER button. The
L.E.D indicator will illuminate and confirm you selection. Knead and
Full will turn on by default, kneading the full back. To turn off the
massage functions, simply press the button again. The L.E.D indicator
will blink while the massage mechanism returns to its lowest point and
then turn off.
Full
Full can only be activated when Power is on. Press Full once. Button
will begin to flash and the massage mechanism will begin traveling up
your back. Once the mechanism reaches your perfect height, press
Full button again. The LED light will go solid and the max height will
be locked in. Pressing Full again will unlock Perfect Fit, and the Full
button will flash.
Tapping
Tapping is a fast, invigorating massage. Tapping can only be
activated when Power is on. Press "Tap" once, the button light will
turn on, Rolling feature will turn off, and Tap is activated. Press
"Tap" button again and Tapping turns off.
Width Adjustment Feature
Width can only be activated when Rolling or Tapping is on. Press
the button to adjust the massage nodes width. With each press,
the massage heads will move to the next available position.
Heat Button
For soothing heat, when either Kneading, Rolling or Tapping
massage is on, simply press the heat button and the
corresponding red L.E.D light will illuminate. To deselect, press
the button again and the corresponding L.E.D. light will turn off.
Quad Shiatsu
NOTE: There is a 15-minute auto shut
off on the unit for your safety.
9
with Heat
Fig. 1