HoMedics MCS-750H-CA Mode D'emploi page 8

NOTE: The moving
massage mechanism
always "parks"
or finishes in its
lowest position. It
will continue to this
position after the
power has been
turned off. If the
electrical supply is
interrupted, when
power is restored, the
mechanism will "park"
or move to its lowest
position.
All manuals and user guides at all-guides.com
Demo Button
For a brief demonstration of the features of the Massage Cushion,
press the Demo button. The L.E.D. light will blink to indicate
active function. The Demo can only be activated when the back
mechanism is at the bottom position or Power Button is on. If
the back mechanism does not start at the bottom, it will go to
the bottom automatically. The unit will briefly go through each
function. Once completed, the unit automatically turns off.
Upper
Upper can only be activated when either Knead, Rolling,
or Tapping is on. Press "Upper" once, the LED light will
illuminate, Kneading, Rolling, or Tapping the upper back. If
"Upper" is already on, press it again, light will stay on the
upper back area.
Lower
Lower can only be activated when Kneading, Rolling,
or Tapping is on. Press Lower once, and LED light will
illuminate, Kneading, Rolling or Tapping the lower
back. If Lower is already on, pressing it again will
keep massage on the lower back.
Kneading Massage
Kneading is a deep penetrating massage. "Knead" can only be activated
when Power is on. Press "Knead" once, light on, rolling will be off, activate
Knead; press it again, Knead off.
Spot Massage Feature
While the unit is in Kneading or Tapping, press spot button and either up or
down and massager will stop in fixed position. Once the feature is operating,
you may adjust the mechanism position by holding down either button until
the desired position is reached. The Up arrow will move the mechanism
upwards, the Down arrow will move it downward. Once the button is released,
the mechanism will stop in that place. Spot position will move from its
current position when Upper, Lower, or Full is pressed. Press Roll to turn off
the spot and start rolling or Full by default.
Rolling Massage
Rolling is like two hands working slowly up and down your back. "Rolling"
can only be activated when Power is on. Press "Rolling" once and LED light
will illuminate; Kneading and Tapping will be off. press it again, Rolling will
turn off.
8