Cisco SPA302D Guide De Démarrage Rapide page 8

To adjust the ringtone volume when a call is not in progress: Press the right
arrow button to increase the volume. Press the left arrow button to
decrease the volume.
To turn off the ringer, continue to press the left arrow button until
the message on the display and the ringer off icon indicate that
the ringer is turned off.
To mute the handset microphone, press the Mute button on the
handset. The mute icon appears at the top of the handset display.
Configuring Call Preferences
You can configure the following preferences:
• Do Not Disturb—Incoming calls do not reach your handset. (They will
not display in the Received Calls list.)
• Call Waiting—If call waiting is enabled, while on a call, a beep tone will
alert you of a second incoming call.
• Block Caller ID—Prevents your number from displaying on the Caller
ID of numbers that you call.
• Block Anonym Call—Blocks incoming calls to your handset from
callers who have blocked their caller ID.
Depending on how your handset is configured (connected to the IP
N
OTE
network or the PSTN), these preferences may not be available on your
handset.
To configure features such as Do Not Disturb, Call Waiting, and more:
Press the Select button to view the available preferences.
S 1
TEP
Scroll to Call Settings and press the Select button again.
S 2
TEP
Press the Select button to choose Call Preferences.
S 3
TEP
Press the up or down arrow button to scroll to the setting you want
S 4
TEP
to configure.
Use the right and left arrow buttons to turn the feature on or off.
S 5
TEP
Press the left softkey (Save), or the center Select button to save
S 6
TEP
your changes.
8 Cisco SPA302D