Ending A Call; Transferring A Call - Cisco SPA302D Guide De Démarrage Rapide

Ending a Call

To end a call, do one of the following tasks:
• Press the red End Call button.
• Press the right softkey to select End Call.
Using Call Waiting
If call waiting is enabled, while on a call, a beep tone will alert you of a
second incoming call.
To answer the call, press the left softkey to select Answer and put the first
call on hold. To ignore the call, press the right softkey to select Ignore.
To return to the first call, do one of the following tasks:
• Press the right softkey to select End Call to end the active call and
return to the call on hold.
• Press the left softkey to select Options and choose Swap to place the
current call on hold and return to the first call. The active call is shown at
the top of the screen and is indicated by the active call icon.

Transferring a Call

To transfer a call:
Press the left softkey to select Options.
S 1
TEP
Scroll to Transfer and press the Select button.
S 2
TEP
Enter the number to which to transfer. The Cisco SPA302D
S 3
TEP
automatically dials the number.
You can transfer before the called number answers, or you can
S 4
TEP
wait to speak to the called number. To transfer, press the left
softkey to select Options, scroll to Transfer, then press the left
softkey button.
Adjusting Volume and Muting
To adjust the audio volume during a call: Press the right arrow button on the
4-way navigation keypad to increase the volume. Press the left arrow
button to decrease the volume.
Cisco SPA302D 7