Kalorik FT 46688 Mode D'emploi page 14

• Never immerse the appliance in water and make sure that no
water or moisture penetrates the upper part of the Smart Fryer.
• Clean the heating element inside the Smart Fryer with a cleaning
brush to remove any food residue.
Cleaning the Smart Fryer's exterior:
• Wipe clean with a damp sponge or cloth. Wipe dry.
• NEVER use steel wool, metal scouring pads or abrasive cleaners, as
they may damage the finish.
Any other servicing should be performed by an authorized service
representative.
DO NOT IMMERSE THE FRYER IN WATER OR ANY OTHER LIQUID!
TROUBLESHOOTING
Problem
The Smart Fryer
does not work
The ingredients
fried with the
Smart Fryer are not
done.
www.KALORIK.com
Possible cause
The appliance is not
plugged in.
You have not set the
timer.
The basket is not
properly locked.
There is too much
food in the basket.
The set temperature is
too low.
The cooking time is
too short.
Put the main plug in an earthed
Turn the timer knob to the
required preparation time to
switch on the appliance.
Push the basket back in the
Smart Fryer properly.
Put smaller batches of
ingredients in the basket.
Smaller batches are fried more
Turn the temperature control
knob to the required
temperature setting (see section
Turn the timer knob to the
required preparation time (see
section 'Settings')
14
Solution
wall socket.
evenly.
'Settings')
FT 46688 – 210430