All manuals and user guides at all-guides.com
TWS mode
If you purchase a second loudspeaker of the same type
(IAN 313951), it is possible to connect both loudspeakers and use them
as a stereo loudspeaker system . A second loudspeaker can be purchased
at www .kompernass .com .
The TWS ("True Wireless Stereo") function allows two speakers to be connected
to each other .
The left speaker is thus the main speaker which is always connected to a
Bluetooth
Bluetooth
Activate TWS mode
NOTE
Do not activate TWS mode if there is a Bluetooth
►
a speaker and a Bluetooth
♦
Switch on both speakers .
♦
Briefly press the
left speaker . You will hear a beep and the TWS LED
during pairing .
♦
Press the button
♦
If the pairing of the two speakers has been successful, you will hear a short
beep . TWS mode is activated .
♦
The TWS LED
♦
The TWS LED
Pair the left speaker with a Bluetooth
♦
Start playback on the Bluetooth
♦
NOTE
►
If you do not pair the two speakers within 6 minutes, the speakers will turn
off automatically . In this case, you will have to switch the speakers back on
again before restarting the pairing process .
►
Make sure you position the left and right speakers correctly for playback .
►
The playback buttons work on both speakers .
■
32
│
GB │ IE
®
device . This speaker transmits the sound coming from the
®
device to the right speaker .
button
on the second speaker briefly .
on the left speaker lights up green .
on the right speaker flashes green .
®
device .
on the first speaker that you want to use as the
®
device .
®
device .
®
connection between
flashes green rapidly
SLXL 20 A1