Troubleshooting; Error Codes - virtufit TR-50i Manuel

Totally Foldable TR-50i Loopband
Gebruiksaanwijzing
ENGLISH
CAUTION! Regular maintenance will extend the life of the treadmill
Voor vragen of ontbrekende onderdelen kunt u contact opnemen met Fitness Benelux:
and prevent injury!

TROUBLESHOOTING

Abnormal speed: Take error code "E03" as an example (error codes
follow after troubleshooting).
No power: Check that the fuse is connected and that the sensor cable
is connected to the console.
Motor failure: Check that the motor needs to be replaced.
Motor burnt out: Check if the console is also burnt out. Replace the
motor. If the check reveals that the console is also burnt out, replace it.
Power failure: Check that the sensor cable is properly connected.
Screen display not working properly: Turn off the unit and restart the
engine. Turn on the unit and check that the display is back to normal. If
this does not solve the problem, replace the console.
No display: Check that the voltage is correct and that the power supply
is 8V.
LCD screen flashes: Check that the power is on and that the power
supply is 8V.
Light display is not clear: Turn off the unit and check that the sensor
cable is properly connected. Turn the unit back on and check that the
backlit display is clear again. If this does not solve the problem, replace
the console.
USB player does not play music: Check if the MP3 connection is
working. If it does not work properly, open the console to check that
the cables are properly connected to the amplifier. Re-insert the
T +31 (0)74-7600219
E ser
W
NL
USB drive to check if the music is playing. If this does not correct the
problem, replace the console.
The dongle does not work properly: Check that the dongle is properly
attached. Open the console and check that the switch and cable are
not damaged. If this does not solve the problem, replace the console.
Console buttons do not work properly: If a button does not work, open
the console and check that the button is not damaged. If the button is
damaged, replace the console. If more than one button does not work,
restart the console and check that the buttons work again. If this does
not correct the problem, replace the handle.
The buttons on the handle do not work properly: Wash your hands,
dry them thoroughly and test the buttons again. If this does not solve
the problem, check that the handle cables are not damaged and that
they are properly connected to the connector. If this still does not solve
the problem, replace the handle.
Hand sensors are not working properly: Wash your hands, dry
them well and test the hand sensors again. If this does not solve the
problem, check that the handle cables are not damaged and that they
are correctly connected to the socket. If this still does not solve the
problem, replace the handle.

ERROR CODES

E01: Console signal failed.
• Solution: Check that the sensor cable is not damaged and that
it is correctly connected. If it is, replace the console.
E02: The console does not recognise the engine power.
• Solution:: Check that the positive and negative motor cables
are correctly connected to the console terminal interface. If this
is correct, check that the power tube (located on the console and
peripherals) is not damaged. If this does not correct the problem,
replace the console or motor.
E03: The speed display is not recognised by the console when the
motor is running.
• Solution: Verify that the motor is running when the treadmill
is turned on and that error code "E03" is displayed. Check that
the light sensor is working properly. Check that the light sensor
cable is secure and that the junction between the light sensor
and the four white pins on the console are properly connected. If
all of the above are correct, check the area of the four white
pins on the peripheral unit for damage and consider replacing
13