virtufit TR-50i Manuel page 3

USER MANUAL
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the device. Some parts (bolts, screws, etc.) are already attached to/in the device.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your device? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The device contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
MONTAGE INSTRUCTIES
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
MONTAGE INSTRUCTIES
1.unscrew the adjusting knob on the both sides of the frame respectively(suggest unscrew 3 circles)
to make lower ends of upright tubes flick from the main frame.
2.uplift the handle bar to the slot corresponding to the hinge of main frame
• Unscrew the adjusting knob on the both sides of the frame respectively(suggest unscrew 3 circles)
to make lower ends of upright tubes flick from the main frame.
• Uplift the handle bar to the slot corresponding to the hinge of main frame.
6
6
After finishing the uplifting,screw the hand knob according to the direction as the arrow shows.
After finishing the uplifting,screw the hand knob according to the direction as the arrow shows.
STEP 01
STEP 1
1
STEP 1
STAP 1
STEP 2
STEP 2
STEP 02
STAP 2
EN
ENG
2
Virtufit Totally Foldable TR-50i Treadmill
03