Installing The Speakers On The Tallboy Stand - Samsung HT-E6530 Guide D'utilisation

Connections

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and
connect it to the Stand.
2. Insert screws (5x20) clockwise into the three
holes marked using a screwdriver as shown in
the illustration.
3. Straighten a supplied speaker wire and put in
the hole on the center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw (5x15) clockwise into the hole
on the rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the
color coded plug on each bundle to the colored sticker on the bottom of
each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire,
and then release the tab.
b. Press down the black tab on the back of the speaker, insert the black
wire, and then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the
product by matching the colors of the speaker plugs to the colors of the speaker jacks.
16
|
English
HT-E6530_ZC_0315.indd 16 HT-E6530_ZC_0315.indd 16
All manuals and user guides at all-guides.com
1
3
5
Stand Base
2
Stand
4
Speaker
6
Black
Stand
Red
2012-03-15 오후 4:37:40 2012-03-15 오후 4:37:40