Stacking Kit; Installation Procedure - Kenmore 501-80002 Manuel

I
nstallation Instructions

Stacking Kit

In order to stack this dryer on an Kenmore
washing machine(40002), an Kenmore stacking
kit is needed.

Installation Procedure

1. Place the Kenmore dryer on the Kenmore
Washing machine(40002).
2. Unscrew Rear cover in the Base by unscrewing
2 screws.
8
All manuals and user guides at all-guides.com
!
WARNING!
Incorrect installation can cause serious
accidents.
The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more
experienced service personnel.
3. After detaching protection sheet of double-side
tape, align stacking kit holes rear cover holes
and then attach tape to the washer by pressing
hard.
4. Assemble a stacking kit as following.
• Screw 2 screws which is unscrewed earlier to
assemble dryer rear back and stacking kit.(
• Use accessory screws to assemble washer rear cover
and stacking kit. ( , )
• The procedure for the opposite side will be the
same.
F
)