Kenmore 501-80002 Manuel page 14

O
perating Your Dryer
Before first use of the dryer
※ Before you use the dryer for the first time, there are some points that you have to check.
After removing the dryer from the package, check the product has no problem and is properly installed.
1. Check the dryer is well balanced by using a level. In order to check this, you can see and adjust legs which are supposed to stay put.
2. Check major parts, such as the door control panel and drum.
3. Check the operation of the dryer by running it for 5 minutes to be sure it heats.
4. At the first use, there might be a slight odor as dust is burned off the heating element. Leave the door open and it will dissipate.
1. Turn the power on.
First, press the Power button. The indicator light above
the button will become illuminated indicating that the
machine is all set to run.
2. Open the door.
3. Check the lint filter.
The lint filter near the door should be emptied after or
before drying operation. Open the door and check if lint
filter is cleaned. If not, clean it.
4. Place laundry into the drum after
sorting.
The clothes should be sorted by fabric type and
dryness level. All the strings and belts of clothes
should be well tied and fixed before being put into
the drum. It is desired that you push laundry all the
way back to keep it away from the door seal. If not,
door seal and clothes may be damaged.
Note
Be careful not to put buttons, small laundry, and any
kind of small items into the holes below the door
14
All manuals and user guides at all-guides.com
F
Turn on.
Open the
Door.
Check the
lint filter.