Kenmore 501-80002 Manuel page 25

T
roubleshooting Guide
Error Mode
LED displays
High temperature and high humidity of air continues to remain in the contained dryer by drying object during
drying if the dryer suddenly stops due to power failure or other different causes while drying is in progress.
Leaving the dryer continuously in such status may reduce durability of the dryer or have a bad effect on major
electrical parts.
Open the door so that high temperature and high humidity of air discharges outside if the dryer must be
stopped for a long time while drying is in progress.
If /
/
If error occurred, restart the cycle after 30 minutes. If
center.
All manuals and user guides at all-guides.com
in case of the door open. Close the door and press START to resume operation.
error occured, unplug the power cords and then call to the service center.
is not released, call to the service
F
25