Caring For Your Dryer; Clean Lint Filter; Moisture Sensor - Kenmore 501-80002 Manuel

C
aring For Your Dryer
Care and Cleaning is
It's not very difficult to care for your dryer. All you
have to do is to follow the information below.

Clean Lint Filter

Clean lint filter after each use and check it before each
use. It should also be cleaned if the Clean Filter light
lights and the buzzer sounds during operation of the
dryer: Cleaning or emptying the filter will reduce
drying times and energy consumption and lengthen
the dryer life.
1. Open the door.
2. Pull the filter
out.
3. Clean the filter
by using a
vacuum cleaner
or rinsing under
the tap.
4. Replace the
filter.
- Push the
filter all the
way down to
avoid
Interference
with the
door.
5. Close the door.
All manuals and user guides at all-guides.com
Clean filter
This lamp blinks at the start of each use just to remind
you to clean the filter.

Moisture Sensor

This device senses the moisture remaining in the
laundry during operation, which means it must be
cleaned all the time. The main reason of cleaning
this part is to remove the build-up of lime scale on
the surface of sensor. Wipe the sensors inside drum
(shown in the picture).
Note
In the case you wash the lint screen using water,
dry it thoroughly.
F
17