Globrite White Led Pool Light Overview; Operating Globrite Lights Using A Wall Switch - Pentair GLOBRITE Mode D'emploi

™
GloBrite White LED Pool Light Overview
This manual describes how to install and replace the GloBrite
and spa. The 12 VAC GloBrite White LED Light allows you to choose from one of three
brightness levels. For more information see page 2.
Accessory: The optional GloBrite
sold separately] is for use on GloBrite
to reduce light glare.
Operating GloBrite LED Lights Using a Wall Switch
The GloBrite LED light can be manually controlled using a standard wall-mount light
switch. Multiple GloBrite lights can be connected via a junction box and a 12 VAC isolation
transformer to a single switch so that all lights can be switched on and off together. For
wiring diagram, see page 14.
Using an External Safety Isolation Transformer for Multiple 12 VAC GloBrite
Lights
When using multiple GloBrite 12 VAC lights on a 100 Watt safety isolation transformer, it
is recommended that no more than five (5) GloBrite lights be used. For long cable lengths
with a single light, It is recommended not to exceed 150 feet (45.72 m) of total cable run
between the 12 VAC isolation transformer and the GloBrite light.
12 Gauge
100 Watt
(minimum)
Transformer
Maximum Wattage Using Multiple GloBrite LED lights
(with a 300 Watt Isolation Transformer)
IMPORTANT! When using multiple 12 VAC Pentair LED pool and spa lights the total
allowable light wattage is 300 Watts maximum. The individual light wattage is as follows:
• One GloBrite Color LED Pool light is 15 Watts maximum
• One GloBrite White LED Pool light is 15 Watts maximum
• One AmerBrite White LED (500W) pool light is 51 Watts maximum
• One AmerBrite White LED (400W) pool light is 44 Watts maximum
• One AmerBrite White LED (300W) pool light is 36 Watts maximum
• One AmerBrite Color LED pool light is 36 Watts maximum
• One IntelliBrite Color LED pool light is 30 Watts maximum
• One IntelliBrite Color LED spa light is 18 Watts maximum
All manuals and user guides at all-guides.com
™ Glare Shield (P/N 620314 -
™
Color and White LED lights
J Box
45.72 m
(150 ft.)
GLOBRITE™ White LED Light Installation and User's Guide
™
White LED Light for pool
Note: If a longer cable
run is necessary, it is
recommended that
separate 100 Watt safety
isolation transformers be
used for each light with
no more than 45.72 m
(150 ft.) of total cable run
between the transformer
and lights.
1