Globrite Color Changing Led Pool Light Overview - Pentair GLOBRITE Guide D'installation Et De L'utilisateur

®
GloBrite Color Changing LED Pool Light Overview
This manual describes how to install and replace the GloBrite Color LED light for pool and
spa. GloBrite Color LED lights provide brilliant vivid multi-colors with spectacular effects
for your pool. Choose one of the seven pre-programmed color light shows or select one
of the five fixed colors to create virtually endless range of dramatic underwater lighting
effects for a spectacular effect in your pool and spa.
Accessory: The optional GloBrite Glare Shield (P/N 620314 - sold
separately] is for use on GloBrite Color and White LED lights to reduce
light glare.
Operating GloBrite Color LED Lights Using a Wall Switch
The GloBrite color light can be manually controlled using a standard wall-mount light
switch. Multiple GloBrite color lights can be connected via a junction box and a 12 VAC
isolation transformer to a single switch so that all lights can be switched on and off
together. For wiring diagram, see page 15.
Operating GloBrite Color LED Lights Using Automation Control System
GloBrite color lights can also be automatically controlled using the Pentair IntelliTouch
Control System and the EasyTouch
IntelliTouch Control System User's Guide (P/N 521075), and EasyTouch Control System
User's Guide (P/N 521044).
Using an External Safety Isolation Transformer for Multiple 12 VAC GloBrite
Color Lights
When using multiple GloBrite 12 VAC color lights on a 100 Watt safety isolation
transformer, it is recommended that no more than three (3) GloBrite color lights be used.
For long cable lengths with a single light, It is recommended not to exceed 45.72 m
(150 ft.) of total cable run between the 12 VAC isolation transformer and the GloBrite color
light.
100 Watt
Transformer
Maximum Wattage Using Multiple Color LED lights
(with a 300 Watt Isolation Transformer)
IMPORTANT! When using multiple 12 VAC Pentair LED pool and spa lights the total
allowable light wattage is 300 Watts maximum. The individual light wattage is as follows:
• One GloBrite Color LED Pool light is 15 Watts maximum
• One GloBrite White LED Pool light is 15 Watts maximum
• One AmerBrite White LED (500W) pool light is 51 Watts maximum
• One AmerBrite White LED (400W) pool light is 44 Watts maximum
• One AmerBrite White LED (300W) pool light is 36 Watts maximum
• One AmerBrite Color LED pool light is 36 Watts maximum
• One IntelliBrite Color LED pool light is 30 Watts maximum
• One IntelliBrite Color LED spa light is 18 Watts maximum
Control System. For more information refer to the
®
12 Gauge
J Box
(minimum)
45.72 m
(150 ft.)
GloBrite Color Changing LED Pool/Spa Light Installation and User's Guide
Note: If a longer cable
run is necessary, it is
recommended that
separate 100 Watt safety
isolation transformers be
used for each light with
no more than 45.72 m
(150 ft.) of total cable run
between the transformer
and lights.
1
®