Music From External Audio Device; Volume Control; Alarm - Oregon Scientific RRM902 Manuel

4. Once desired frequency has been found, press and hold
to save. Station number (e.g.,
where it has been stored.
5. Repeat steps 2 – 4 for all storage locations.
For your convenience, the volume and radio frequency will
be stored in memory for the next time radio is turned on.
To view alarm display (when radio is on):
Press .
•

MUSIC FROM EXTERNAL AUDIO DEVICE

Using a cable, plug one end to your music storage device
and one end to audio line-in socket (
back of unit.
When cable has been successfully connected,
be displayed on the LCD screen and sound will emit from
speakers.
NOTE
• To play music from external audio device, ensure
soothing sound and radio is turned off.
• Connecting / disconnecting of external audio device will
turn the alarm off.

VOLUME CONTROL

• Press VOL+ or
All manuals and user guides at all-guides.com
) indicates
) located at the
will
VOL-.

ALARM

To set the alarm:
1. Press and hold
2. Press VOL+ or
settings.
3. Press to confirm.
The setting order is: Hour, minute, alarm option (
soothing sound / beep or
soothing sound, 9: beep) or radio station, volume (cannot
be adjusted for beep alarm).
To toggle alarms ON / OFF:
1. Press to display alarm time.
2. Press again to turn alarm ON / OFF.
indicates alarm is on.
To silence the alarm:
Touch SNOOZE · SOUND to silence it for 8 minutes
•
OR
Press any other key (except DIMMER) to turn the alarm
•
off and activate it again after 24 hours.
7
.
VOL- to change the
Radio), sound type (1-8: