Attaching The Strap; Loading The Batteries - Kodak EasyLoad35 KE30 Mode D'emploi

ATTACHING THE STRAP

1. Insert one end of the
strap under the
(12) and pull
POST
it through.
2. Thread the longer
end of the strap
through the
shorter loop.
3. Pull the strap tight.
4
STRAP

LOADING THE BATTERIES

This camera uses 2 AAA-size alkaline
1.5 V KODAK K3A (or equivalent)
Batteries.
1. Open the
BATTERY DOOR
• Before you remove the old
batteries, turn off
the camera
by sliding the
-
LENS COVER
(11) to
SWITCH
the off position.
(20).