Technical Data - Videotec UEBP4 Manuel D'instructions

6.6.2 7-pole connector
For 7-pole connectors, weld the conductors in the
pins.
Fig. 14 7-pole connector.
7-POLE CONNECTOR
Colour Pin number
Yellow-Green GND
Black 1
Orange 2
Red 3
Blue 4
White 5
Grey 6
Tab. 3
6.6.3 Completion of the assembly
Screw in the body of the connector (04) to the front
with the contacts (05).
Pay attention to the fixing. Tightening
torque: From 0.75Nm up to 1Nm.
05
04
Fig. 15
6
Fasten the sealing nut (06).
Pay attention to the fixing. Tightening
torque: 2.5Nm.
Fig. 16
Connect the mobile connector on the fixed
connector and tighten the ring nut.

7 Technical data

7.1 Mechanical
Support for ULISSE EVO PTZ camera
Aluminium pressure casting construction
Dimensions: 129x53x180mm (5x2x7in)
Unit weight: 0.65kg (1.4lb)
7.2 Electrical
Ethernet cable: Shielded twisted cable (STP)
4-pole connector:
Power supply cables section: from 0.75mm² (18AWG)
up to 2.5mm² (13AWG).
Cables signal section: from 0.14mm² (26AWG) up to
1mm² (17AWG)
Multipolar cable sheath diameter: from 6mm up to
12mm
7-pole connector:
Power supply cables section: 0.75mm² (18AWG).
Cables signal section: from 0.14mm² (26AWG) up to
0.75mm² (18AWG)
Multipolar cable sheath diameter: from 6mm up to
12mm
06
MNVKUEBP4_2222_EN