Grounding The Appliance; Minimum Clearance To Combustibles; Minimum Mantel Clearances - Napoleon CLEARion Elite NEFBD50HE Manuel D'installation Et D'opération

Masquer les pouces Voir aussi pour CLEARion Elite NEFBD50HE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

installation
EN
2.2

grounding the appliance

WARNING
!
This appliance is for use with 120 volts and 240 volts.
A bonded/grounded power source is mandatory for this appliance.
This appliance must be connected to a dedicated 15 amp circuit. The use of an extension cord is NOT
permitted.
2.3

minimum clearance to combustibles

2.4

minimum mantel clearances

WARNING
!
When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discoloration.
8" (203mm)
WALL
note:
* If fi nishing materials are installed on top of the already 8" (203mm) wall, a 3/8" (10mm) clearance must be
maintained at the top of the trim in order to service the appliance.
10
W415-2107 / D / 04.15.20
Measurements are taken from the front trim
Bottom
Sides
Front / Back
Mantel
L
2mm GAP
0"
0"
36" (914mm)
8" (203mm)
MANTEL
8"
(203mm)
8" (203mm)
Finishing Material
WALL
Thickness
1 1/2" (38mm)
maximum.
Trim
Clearance
3/8" (10mm)
minimum *
Finishing
materials

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Clearion elite nefbd60he

Table des Matières