Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Connections/ Initial Setup
Please make all cable or antenna connections before powering on.
How to Connect
Connecting
For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with an
RF cable.
WARNING:
Overtightening "Nut type" RF coaxial cables
may damage jacks. Finger tighten only.
Initial Setup (Ready to Play)
1
Plug the unit power cord into an
AC wall outlet.
Press Power on the remote or
2
unit. The unit comes on and auto
channel and clock set starts.
CH AUTO SET PROCEEDING
• If you use a cable box, turn it on and set it to the
Public Broadcasting Service (PBS) channel in
your time zone. If you use a DSS receiver, it
must be turned off.
AUTO CLOCK SET
PROCEEDING
CANCEL : PRESS STOP KEY
8
(Ready to Play)
IN from
ANT./CABLE
VHF/UHF
VHF/UHF
UNIT
Cable TV
Converter Box
VHF/UHF
3
Settings are made
automatically. When setup is
done, this screen appears.
2 / 6 / 2002 WED 12 : 00PM
DST : ON
SETT I NG : CH 1 0
AUTO CLOCK SET
COMPLETED
If AUTO CLOCK SET IS
INCOMPLETE
appears on
screen,
set the clock using
MANUAL CLOCK SET
procedure as shown on page 9.
SET CLOCK
2 / 6/
2002 WED 12 00PM
DST : ON
SET COMPLETED
SET
:
START
: ACT I ON
IN from
ANT./CABLE
:
Publicité
Table des Matières
