Index Search - Panasonic Omnivision PV-C1322-K Manuel D'utilisation

All manuals and user guides at all-guides.com
Tape Operation
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.
1
Press SEARCH
I NDEX SEARCH
in Playback or
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
Stop mode to
display INDEX
FORWARD SEARCH : FF
REVERSE SEARCH : REW SEARCH screen.
NEXT : SEARCH
EX I T : STOP
2
Press number
I NDEX SEARCH 3
keys
I NDEX SEARCH
to select the
recording number.
• To calculate
number, see below.
3
Press FF or REW
I NDEX SEARCH
to start search.
• Play begins at search
end. To search
forward or back 1
FORWARD SEARCH : FF
index, press FF or
REVERSE SEARCH : REW
REW while screen
left is displayed (10
seconds).
I To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3 4 5
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3 4 7 5
NOTE: indicates start points of each recording.
Notes
• Make each entry within 10 seconds, or the
Index Search mode will be cancelled.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
22
Program End Search
Locates end point of recording for continuity.
1
Press SEARCH twice in Playback or
Stop mode to display PROGRAM END
SEARCH screen .
2
PROGRAM END SEARCH
SEARCH START
EX I T : SEARCH
Example of Program End Search operation.
Fig.1
Program 1
Press SEARCH button
FF
Fig.2
Program 1
Press SEARCH button
Fig.3
If search exceeds a few seconds in BLANK area.
Press SEARCH button
Program 1
End Point
Upon locating end point...
6 7
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
Press SEARCH button
6 7
Notes
• If Program End Search is started very close
to an index mark, that mark may be
skipped over.
• To cancel, press PLAY or STOP.
Press FF
to start search.
: FF
PLAYBACK DIRECTION
Program 2 or BLANK
End Point
Program 2
BLANK BLANK
End Point
FF
BLANK Program 2
FF