Rollei 560 Touch Mode D'emploi page 16

Press the Power OFF button and hold on for 3 seconds to turn off the camera, the
LED indicator turns off accordingly.
Video Record
Press the video button once to start recording, the LED indicator flickers twice also,
press the Video button again to stop.
Taking a photo
Press the Photo button once to take a single picture, the LED indicator of the remote
flickers twice.
6.3 Replace a new button battery
Like any battery, the one in the AC 560 TOUCH remote will eventually become empty.
When it does, the red LED indicator flickers once per second. You need to replace
with a new battery.
How to replace a button battery?
Step 1 Step 2 Step 3
 
1. Buy a button cell with model No. CR2032.
2. Screw the round cap at the bottom of remote, see above pictures for reference.
3. Remove the old battery.
4. Insert the new battery into the slot with the flat surface up.
7. Wi-Fi Setup
The AC 560 TOUCH allows full camera control, live previewing and playback of
photos/videos on most Smart phones and Tablets.