NEC MultiSync LCD195WXM Manuel De L'utilisateur page 9

Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm. Please use the attached
screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
Specifications
4-SCREWS (M4)
MAX depth: 7.0 mm
If using other screws,
check depth of holes.
All manuals and user guides at all-guides.com
Replace screws
7
Quick Start
Thickness of Bracket
(Arm) 2.0~3.2 mm
00 mm
Weight of LCD assembly:
4.6 kg (MAX)
- continued
Tighten all
screws.
00 mm